Support hotline: +49 381 121 83 192, Mon-Thu 7:30 am - 5 pm, Fri 7:30 am - 2 pm
Fast & uncomplicated shipping
Purchase on account
Englisch
Auswahl im Warenkorb Ab 120,00 € Bestellwert
12 Jahre LaSi24

Lashing tracks

Secure fastening systems for the truck

Cargo securing by and with lashing tracks is an important and indispensable topic, both in the private and the business sector. It is therefore in your own interest to always pay attention to safety. Lashing tracks help to secure the load optimally. They are used in conjunction with lashing straps, locking rods and other cargo securing products.

A very important question is what the breaking load of a lashing track is. First of all, there is no fixed information on this, because the load capacity essentially depends on the fastening distance of the individual lashing points. Furthermore, the screws, the introduction into the base surface and the fittings used are also key factors. The tighter a lashing track is bolted, the more it can withstand and thus ensure secure cargo securing in the truck. A solid base also contributes significantly to the safety and stability of a lashing track.

It is important to know that the drill hole diameter should always be 0.1 mm to a maximum of 0.2 mm larger than the screw diameter. The full strength cannot be achieved with screws that are too short, but screws that are too long should not be used for lashing tracks either, as this can cause unnecessary bulges on the back.

A lashing system can be used in a wide variety of ways, so in addition to securing cargo, it can also be used for flexible furniture installation.

One of the advantages of lashing tracks and lashing track systems is that they are flexible and can be used for different areas. A lashing track can be mounted very easily with screws or rivets. The lashing point can be moved within a few seconds. Lashing tracks are often made of aluminium, which makes them very lightweight. They can also withstand extremely high loads and are therefore ideally suited for securing cargo in trucks.

There are also suitable accessories for a lashing track: among other things there are end caps for lashing tracks, tracks with pins with or without protective rubber, anchor combi lashing tracks made of steel etc. Suitable fittings and hooks are available for each type of lashing track to ensure optimum cargo securing in combination with lashing straps.

Secure fastening systems for the truck Cargo securing by and with lashing tracks is an important and indispensable topic, both in the private and the business sector. It is therefore in your... read more »
Close window
Lashing tracks

Secure fastening systems for the truck

Cargo securing by and with lashing tracks is an important and indispensable topic, both in the private and the business sector. It is therefore in your own interest to always pay attention to safety. Lashing tracks help to secure the load optimally. They are used in conjunction with lashing straps, locking rods and other cargo securing products.

A very important question is what the breaking load of a lashing track is. First of all, there is no fixed information on this, because the load capacity essentially depends on the fastening distance of the individual lashing points. Furthermore, the screws, the introduction into the base surface and the fittings used are also key factors. The tighter a lashing track is bolted, the more it can withstand and thus ensure secure cargo securing in the truck. A solid base also contributes significantly to the safety and stability of a lashing track.

It is important to know that the drill hole diameter should always be 0.1 mm to a maximum of 0.2 mm larger than the screw diameter. The full strength cannot be achieved with screws that are too short, but screws that are too long should not be used for lashing tracks either, as this can cause unnecessary bulges on the back.

A lashing system can be used in a wide variety of ways, so in addition to securing cargo, it can also be used for flexible furniture installation.

One of the advantages of lashing tracks and lashing track systems is that they are flexible and can be used for different areas. A lashing track can be mounted very easily with screws or rivets. The lashing point can be moved within a few seconds. Lashing tracks are often made of aluminium, which makes them very lightweight. They can also withstand extremely high loads and are therefore ideally suited for securing cargo in trucks.

There are also suitable accessories for a lashing track: among other things there are end caps for lashing tracks, tracks with pins with or without protective rubber, anchor combi lashing tracks made of steel etc. Suitable fittings and hooks are available for each type of lashing track to ensure optimum cargo securing in combination with lashing straps.

Close filters
  •  
  •  
  •  
from to
from to
from to
1 From 6
No results were found for the filter!
End cap for airline tracks semi-circular

Grey

2.90 € *
Incl. 19% VAT.

plus shipping costs

Netto: 2.44 €
From 1 Pc. 2.90 € * incl. VAT.
From 10 Pc. 2.50 € * incl. VAT.
From 50 Pc. 1.90 € * incl. VAT.
From 100 Pc. 1.50 € * incl. VAT.
End cap for track with pins

With protective rubber

2.90 € *
Incl. 19% VAT.

plus shipping costs

Netto: 2.44 €
From 1 Pc. 2.90 € * incl. VAT.
From 10 Pc. 2.50 € * incl. VAT.
From 50 Pc. 1.90 € * incl. VAT.
From 100 Pc. 1.50 € * incl. VAT.
-79
Sale
End cap for track with pins without protective rubber
2.90 € * 0.60 € *
Incl. 19% VAT.

plus shipping costs

Netto: 0.50 €
End cap for airline tracks rectangular-flat

Grey

2.90 € *
Incl. 19% VAT.

plus shipping costs

Netto: 2.44 €
From 1 Pc. 2.90 € * incl. VAT.
From 10 Pc. 2.50 € * incl. VAT.
From 50 Pc. 1.90 € * incl. VAT.
From 100 Pc. 1.50 € * incl. VAT.
Made in EU
Airline track rectangular drilled bare

Length: 1500 mm

21.90 € *
Incl. 19% VAT.

plus shipping costs

Netto: 18.40 €
From 1 Pc. 21.90 € * incl. VAT.
From 5 Pc. 21.50 € * incl. VAT.
From 10 Pc. 20.90 € * incl. VAT.
Made in EU
Airline track semi-circular drilled bare

Length: 1500 mm

21.90 € *
Incl. 19% VAT.

plus shipping costs

Netto: 18.40 €
From 1 Pc. 21.90 € * incl. VAT.
From 5 Pc. 21.50 € * incl. VAT.
From 10 Pc. 20.90 € * incl. VAT.
Made in EU
Airline track semi-circular drilled bare

Length: 1975 mm

24.90 € *
Incl. 19% VAT.

plus shipping costs

Netto: 20.92 €
From 1 Pc. 24.90 € * incl. VAT.
From 5 Pc. 24.50 € * incl. VAT.
From 10 Pc. 23.90 € * incl. VAT.
Made in EU
Airline track semi-circular shape black

Length: 1975 mm

69.90 € *
Incl. 19% VAT.

plus shipping costs

Netto: 58.74 €
From 1 Pc. 69.90 € * incl. VAT.
From 5 Pc. 68.90 € * incl. VAT.
From 10 Pc. 66.90 € * incl. VAT.
Made in EU
Airline track semi-circular drilled black

Length: 1975 mm

74.90 € *
Incl. 19% VAT.

plus shipping costs

Netto: 62.94 €
From 1 Pc. 74.90 € * incl. VAT.
From 5 Pc. 73.90 € * incl. VAT.
From 10 Pc. 71.90 € * incl. VAT.
Made in EU
Airline track rectangular drilled bare

Length: 1975 mm

24.90 € *
Incl. 19% VAT.

plus shipping costs

Netto: 20.92 €
From 1 Pc. 24.90 € * incl. VAT.
From 5 Pc. 24.50 € * incl. VAT.
From 10 Pc. 23.90 € * incl. VAT.
End cap for airline tracks semi-circular

black

2.90 € *
Incl. 19% VAT.

plus shipping costs

Netto: 2.44 €
From 1 Pc. 2.90 € * incl. VAT.
From 10 Pc. 2.50 € * incl. VAT.
From 50 Pc. 1.90 € * incl. VAT.
From 100 Pc. 1.50 € * incl. VAT.
Track with pins with rubber

Length: 1500 mm

42.90 € *
Incl. 19% VAT.

plus shipping costs

Netto: 36.05 €
From 1 Pc. 42.90 € * incl. VAT.
From 5 Pc. 42.50 € * incl. VAT.
From 10 Pc. 41.90 € * incl. VAT.
1 From 6
Viewed